| |
|
|
|
|
|
|
| |
Connects
directly to the Data Highway Plus Network and is accessed by
either a female 9 pin "D" Shell or a female 8 pin
mini- Din connector. (No
Cable)
|
|
|
Connects
directly to the Data Hwy. Plus Network and is accessed by a
8 pin female mini-DIN connector.
|
|
|
Connects
directly to the data
Hwy. Plus Network and is accessed by a 9 pin female “D” shell
Connector. (No Cable)
|
|
|
Connects
directly to a Female 25 pin “D” shell serial port
of any PLC5 processor or to the Data Hwy. Plus Network.
|
|
| |
|
|
|
|
|
|
|
| |
Connects
directly to the Male 9 pin “D” shell of the
RS232 port or to the Data Hwy Plus Network.
|
|
|
Connects
directly to the EtherNet (CAT5) port or to the Data Hwy Plus
Network.
|
|
|
Connects
directly to the
communication port of any EtherNet 10 base T using a
CAT5 connector. (Same style connector as RJ45 & SLC500 )
|
|
|
Connects
directly to the
communication port of the ContrlNet using a shielded
CAT5 connector.
|
|
| |
|
|
|
|
|
|
|
| |
Connects
directly to the
programming port of any PLC5 Classic Processor using a female
9 pin “D” shell connector.
|
|
|
Connects
directly to the
programming port of any PLC5 Enhanced family processor using a female
8 pin mini-DIN connector.
|
|
|
Connects
directly to the
programming port of any SLC504 family processor that uses a male
9 pin “D” shell connector,
allowing program access outside of enclosure.
|
|
|
Connects
directly to the
programming port of any MicroLogix family processor using a special
keyed 8 pin connector. (6 ft. cable only)
|
|
| |
|
|
|
|
|
|
|
| |
Connects
directly to the 3 pin connector similar to the KXT card, remote
I/0 or the DH+ channels. (No Cable Included)
|
|
|
Connects
directly to any 984 family processor that uses a female 9 pin “D’ shell
connector.
|
|
|
Connects
directly to the DeviceNet port using a 5 pin inline connector.
(No Cable Included)
|
|
|
Connects
directly to any BNC connector (50 ohm).
|
|
| |
|
|
|
|
|
|
|
| |
Connects
directly to a 6 pin
Mini-DIN connector. (PS2 port)
|
|
|
Connects
directly to an 8 pin
Mini-DIN connector.
|
|
|
Connects
directly to a 9 pin “D” shell.
|
|
|
Connects
directly to a
RJ12 (6 x 6) connector
or a RJ11 (6 x 4) connector.
|
|
| |
|
| |
|
|
|
|
|
|
|
|
| |
Connects
directly to programming port of any GE Fanuc CNC (PCR Style)
via
a RS232 connection using a female 25 pin “D” shell
connector.
|
|
|
Connects
directly to a 15 pin “D” shell.
|
|
|
Connects
directly to a 15 pin High Density “D” shell.
(VGA / Monitor)
|
|
|
Connects
directly to a 25 pin “D” shell.
|
|
| |
|
|
|
|
|
|
|
| |
Connects
directly to a female 5 pin Circular Din connector, allowing communication
access from outside of enclosure.
CR, CRB, N4, & PP Ports
|
|
|
Connects
directly to the EtherNet 10/100 base T port.
Select Between:
PROGRAM: Between external port and Processor.
RUN: Between processor and remote hub.
|
|
|
Connects
directly to a 9 pin
male RS232 port. Select Between:
PROGRAM: Between Host & External programming port.
RUN: Allows communication between Host & Slave device.
|
|
|
Connects
directly to a 9 pin male RS232 port. Select Between:
INTERFACE: Between
external port, Interface & Processor.
PROCESSOR: Between
external port & processor.
RUN: Allows communication between Host & Slave device.
|
|
| |
| |
|
|
|
|
|
|
| |
For
Universal Serial Bus Connection Sspecify:
USB -A, USB -B
|
|
|
Connects
directly to a female 6 pin mini-DIN connector allowing access for
a Keyboard and a Mouse
connection. (Two PS2 Ports)
|
|
|
Communication
made
conveniently with our
3.5” Floppy Drive Unit.
(No Cables included)
|
|
|
Touch
Safe cover on back side of
PC Style Unit only.
|
|
| |
|
|
|
|
|
|
|
